Products Conveyor Components Capping Rubber Prouduct Power Transmission Belts Industrial BeltsIndustrial Belts
Industrial Timing Belts
Trapezia Teeth Rubber Timing Belt
| Type | Pitch | Tooth height | Belt thickness | Angle ß ° |
| Pb(mm) | ht(mm) | hs(mm) | ||
| MXL | 2.03 | 0.51 | 1.14 | 40 |
| XL | 5.08 | 1.27 | 2.30 | 50 |
| L | 9.53 | 1.91 | 3.60 | 40 |
| H | 12.70 | 2.29 | 4.30 | 40 |
| XH | 22.23 | 6.35 | 11.20 | 40 |
| XXH | 31.75 | 9.53 | 15.70 | 40 |
| T2.5 | 2.50 | 0.70 | 1.30 | 40 |
| T5 | 5.00 | 1.20 | 2.20 | 40 |
| T10 | 10.00 | 2.50 | 4.50 | 40 |
| T20 | 20.00 | 5.00 | 8.00 | 40 |
| AT5 | 5.00 | 1.20 | 2.70 | 50 |
| AT10 | 10.00 | 2.50 | 5.00 | 50 |
| AT20 | 20.00 | 5.00 | 8.00 | 50 |
Arc Teeth Rubber Timing Belt
| Gear code | Type | Pitch | Tooth height | Belt thickness |
| Pb(mm) | ht(mm) | hs(mm) | ||
| HTD | 2M | 2 | 0.75 | 1.36 |
| 3M | 3 | 1.17 | 2.40 | |
| 5M | 5 | 2.06 | 3.80 | |
| 8M | 8 | 3.36 | 6.00 | |
| 14M | 14 | 6.02 | 10.00 | |
| 20M | 20 | 8.40 | 13.20 |
| Gear code | Type | Pitch | Tooth height | Belt thickness |
| Pb(mm) | ht(mm) | hs(mm) | ||
| STPD/STS | S2M | 2 | 0.76 | 1.36 |
| STPD/STS | S3M | 3 | 1.14 | 2.20 |
| STPD/STS | S4.5M | 4.5 | 1.71 | 2.81 |
| STPD/STS | S5M | 5 | 1.91 | 3.40 |
| STPD/STS | S8M | 8 | 3.05 | 5.30 |
| STPD/STS | S14M | 14 | 5.30 | 10.20 |
| Gear code | Type | Pitch | Tooth height | Belt thickness |
| Pb(mm) | ht(mm) | hs(mm) | ||
| RPP/HPPD | 2M | 2 | 0.76 | 1.36 |
| RPP/HPPD | 3M | 3 | 1.15 | 1.90 |
| RPP/HPPD | 5M | 5 | 1.95 | 3.50 |
| RPP/HPPD | 8M | 8 | 3.20 | 5.50 |
| RPP/HPPD | 14M | 14 | 6.00 | 10.00 |
Double Timing belt
Double teeth timing belt can be divided into two types:
- DA-duplex synchronous belt tooth, a tooth with its two symmetrical arrangement
- DB-duplex synchronous belt gear, with its two locations with staggered teeth
| Type | Teeth Height (mm) | Size | Pitch Length (mm) | ||
| D-XL | 3.05 | 200~XL-540XL | 508 - 1371.16 | ||
| D-L | 4.58 | 203L - 660L | 514.35 - 1524 | ||
| D-H | 5.95 | 200H - 2700H | 508 - 6858 | ||
| D-T5 | 3.40 | T5x500 - T5x1415 | 500 - 1415 | ||
| D-T10 | 7.00 | T10x900 - T10x3000 | 900 - 3000 | ||
| D-T20 | 13.00 | T20x1700 - T20x5000 | 1700 - 5000 | ||
| D-AT10 | 7.00 | AT10x500 - AT10x7000 | 500 - 7000 | ||
| HTD.DA-3M | 3.10 | 1026-3M - 1401-3M | 1026 - 1401 | ||
| HTD.DA-5M | 5.26 | 500-5M - 1690-5M | 500 - 1690 | ||
| HTD.DA-8M | 8.17 | 512-8M - 4400-8M | 512 - 4400 | ||
| HTD.DA-14M | 14.84 | 1610-14M - 6860-14M | 1610 - 6860 | ||
| HTD.DA-S8M | 7.48 | S8M-512 - S8M-6640 | 512 - 6640 | ||
PU Timing Belt
- PU timing belt is made of thermoplastic polyurethane, and steel cord or kevlar cord.We offer full range of PU endless and open end timing belt.
- Application: Used in Textile, Printing and Chemical Machine and Medical Equipment
- Main Type: MXL, XL, L, H, T2.5, T5, T10, 2M, S2M, 3M, S3M, 5M, S5M, 8M and S8M
Variable Speed Belts
Variable Speed Belts
Continuous variable speed belts with good side pressure resistance and flexibility. High efficient power transmission allows to smoothly follow speed changes, creating excellent acceleration response.
Application: used in gear changers, motorcycles and agricultural machinery.
| Section | Top width (mm) | Thickness (mm) | Length range (mm) |
| W16 | 17 | 6 | 500~1000 |
| W20 | 21 | 7 | 560~1250 |
| W25 | 26 | 8 | 710~1600 |
| W31.5 | 33 | 10 | 900~2000 |
| W40 | 42 | 13 | 1120~2500 |
| W50 | 52 | 16 | 1400~3150 |
| W63 | 65 | 20 | 1800~4000 |
| W80 | 83 | 25 | 2240~5000 |
| W100 | 104 | 32 | 2800~6300 |
Cogged V-Belts
|
The Raw Edged Cogged Belts have two cut surfaces on both sides, so its resistance to bending and heat dissipation are better than wrapped belts. Short fibers are mixed in the rubber in the direction of the belt's width, contributing to power transmission and helping to resist abrasion caused by side pressure.
Application: Used for vertical shaft drives such as agitators and mixers
|
Poly V-Belts
Poly V-Belts
The poly v belt is gaining wide acceptance due to the advantages it exhibits over conventional V-belts. Poly V Belts are particularly good for high speed or high ratio applications which conventional belts are unable to handle. The smooth, vibration free performance and excellent reverse bend characteristics of this belt enable the design of single belt, compact drive systems.
Special Features of Poly V Belt:
- Highly flexible and can be used with smaller pulley diameter resulting in lighter and compact drive.
- Being thinner, the rear side can be used to drive additional accessories / idlers without affecting belt life.
- Eliminates the necessity to use multiple / matched set of belts
- Reduces down time and hence belt replacement cost.
- The design of the Poly V belt allows placement of the tensile member across the total width of the belt, therefore obvious that the Poly V belt will exhibit superior strength to a V-belt of equal width.
Main Type: PH, PJ, PK, PL and PM
| Section | Pitch Width (Pb) |
Total thickness (mm) |
Gear Thickness (mm) |
| PH | 1.60 | 3 | 1.33 |
| PJ | 2.34 | 4 | 2.35 |
| PK | 3.56 | 6 | 3.20 |
| PL | 4.70 | 10 | 4.89 |
| PM | 9.40 | 17 | 10.35 |
Wrapped V-Belts
|
This belt is very commonly used for power transmission. We supply a wide range of types including heat resistance, oil resistance and flexible types.
Narrow v-belt has double power transmission capacity of the classic v-belts due to the effect of the wedge. It features high-speed transmission, and an energy-saving, compact design. Main Type: SPZ, SPA, SPB, SPC, 3V, 5V and 8V
Banded v-belt is made up from Classical, or Narrow belts with a strong tie band over them. Application: used in Vertical shaft drives, V-flat drives, Compressors, Pumps and Agricultural drives. Main Type: RA, RB, RC, R3V, R5V, R8V, RSPZ, RSPA, RSPB and RSPC
Double V-Belt, also named Six side Belt, there are four side on the working section. Application: Textile and Agriculture machine. Main Type: AA, BB and CC
|
Narrow V-Belts
Banded Wrapped V-Belts
Double V-Belts