Power Transmission

Quality Is Our Philosophy

Packing Handling Conveyor Belts

Flat Transmission belt

Print | Email

Construction:

Flat transmission belt is a common flat rubber belt, also called transmission belt, usually uses high-quality cotton canvas as its skeleton layers.

Characteristics:

  1. The flat rubber belt has the characteristics of high strength, good flexibility and small elongation.

  2. Innovative design, adopting advance rubber compound with good adhesion at opposite joint of surface fabric with fillet, delaminating will not occur during operation.

  3. Adopting high quality pure cotton canvass, the duck plies have good endurance and will not easily deform.

Application:

It is mainly used in factories, mines, docks, metallurgical industry, ordinary mechanical power transmission, great power processing of grains like rice and wheat, irrigation equipment, wood cutting and other power transmitting equipment for industry and agriculture.

Product classification:

  1. Category: 28 OZ(ounce), 30 OZ(ounce), 32 OZ(ounce), 34 OZ(ounce) and 36 OZ(ounce).

  2. Cut edge flat rubber belt: Cut edge flat rubber belt is manufactured by adhering several layers of full width canvas together, the sides of the belt are surfaces formed by cutting, the belt edge surfaces are coated with rubber paste.


  3. Round edge flat rubber belt: Round edge flat rubber belt is folded by the outer ply or plies of canvas, and the sides of the belts are curved surfaces.


  4. Available in variety of colors, mainly of them have four colors: light brown, yellow, orange and black.

Rough Top Conveyor Belt

Print | Email

 

Construction:

2 or 3 ply construction with cut edges and carcass of EP fabric.

The surface texture resists the tendency for the material to roll back down the conveyor.

Features:

  1. The top cover is made of wear-resistant rubber with a non-slip surface. It has cushioning effect, mollifies and absorbs vibrations and impacts given on transported materials and simultaneously prevents slippings.

  1. Available with bottom cover or bare back for slider bed applications.

  1. Although it depends on the transported materials, transportation at inclination angles 25 ~ 30 is feasible.

Application:

Rough top conveyor belt is used for transporting light weight goods, such as sacks, boxes and parcels, on inclined surface at angles of maximal 35 degree.

Specification:

Edge No. of ply Top cover Bottom cover
C/E 2 1/8" (3.2 mm) 1/16" (1.6 mm)
C/E 2 1/8" (3.2 mm) Bare back
C/E 3 1/8" (3.2 mm) 1/16" (1.6 mm)
C/E 3 1/8" (3.2 mm) Bare back